Question for perspective wood boat buyer

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Grandbanks3642

Veteran Member
Joined
Apr 29, 2019
Messages
27
Location
USA
Hi,
I am considering a Grand Banks 36 or 42 for live aboard, through research I have found that wood is much cheaper that fiberglass. I love the twin Lehman’s so I would not want a boat 80 or newer. I have lots of boating experience but little with wood and wood maintenance (but have done lots of research). Would a wood boat be a good choice or would it be better to continue to look into the fiberglass boats. Input is much appreciated.

Thanks!
 
I'm a former shipwright and built and repaired big wood boats and small ships. I live on an 83' wood boat built in 1942.
Wood has to be protected. If you let the maintenance go too long and water enters through cracks in paint, caulking, or leaky decks, you have rot. If you have to hire someone to repair it's expensive. In salt water you have to keep a good bottom paint that not only stops marine growth, but keeps wood eating works out of the planking and keel. The salt water itself isn't harmful. The salt preserves. Most people add borate or rock salt to their bilge so a very salty water soaks in and preserves keelson, ribs and bottom planking.
If you use premium paint, etc., you can spend less time doing maintenance, but it's still more than fiberglass and wood boats are generally a steady loss in value. On the other hand, you get a lot more boat for the money.
 
So I've linked this before and will probably link it many times in the future as well. So you think getting a wooden boat is cheaper:

 
Reason wood is cheaper is because it is a lot more maintenance....
 
Reason wood is cheaper is because it is a lot more maintenance....
But you have so much more money available to pay for that maintenance.
At the rate we have spent it every year for the last 3, probably several lifetimes worth.

If we bought comparable plastic vessel, we would be out truckloads of money up front and still pay for maintenance, though admittedly a few grand less/year.
 
Last edited:
There are plenty of older trawlers out there for sale with stout fiberglass hulls and glass over plywood topside that can be had inexpensively.

I have a lot of experience with wood boat restoration and I would not want to own a wood hull. Hull work require haul outs which are expensive. The wood hull will need bottom paint more frequently. Any repairs to the hull will require expensive wood and quite a bit of skill.

A fiberglass hull require less maintenance and less skill required to make repairs.

Top side repair require less skill and can be done in your slip at your leisure.

If you are set on a Grand Banks and can not afford a glass one then a woody is your destiny.
 
. Hull work require haul outs which are expensive. The wood hull will need bottom paint more frequently. Any repairs to the hull will require expensive wood and quite a bit of skill.

A fiberglass hull require less maintenance and less skill required to make repairs.
.

Regardless of hull type they still need to come out of the water for antifouling every year or two.

Cost of haul out is based on size of vessel, not what its made out of.
 
Regardless of hull type they still need to come out of the water for antifouling every year or two.

Cost of haul out is based on size of vessel, not what its made out of.

Older wood hulls will require more lay days.

Fiberglass hulls require light sanding and another coat of bottom paint. 1 to 2 days.

Older wood hull usually require more sanding before paint and there is always a plank or seam to repair.

The sides of the wooden hull will need paint periodically.

The hull sides on an older fiberglass hull may be chalky but can be left that way.
 
Watch the video I linked to above, its not only about paint but replacing planks etc. Don't think I'm discouraging you from owning an older boat, mine is 50 years old. As original build, it was glass over wood. So when you look into my bilge area, you'd be convinced the entire inside and outside is wood with no glass.

The boat has undergone a complete over haul and everything inside below the deck has been removed and replaced. The only soft spot was on the transom which has been fixed.

Original build glass over wood is also a good way to go. The problem with glass over wood is that some guy had a problem wood hull and his solution was to glass it all, often these glass jobs weren't done well, hence a bad reputation for glass over wood.
 
The worst part of owning a wood boat is probably hearing the negative stuff from FG boat owners that know next to nothing about wood but talk like they are smarter than a dumb wood boat owner. People seem to think older things are worthless and people that don’t put them down aren’t very smart.

That said there are many wonderful features of wood boats and more than a few FG nightmares that will never happen to a wood boat owner.

I have a comment that probably won’t come from anybody else that will be worthwhile if you find a single engined GB. It’s all about weight. Intending to live aboard you will need the capacity to put things like a washing machine, dish washer, big TV (they are heavy) and much else that you might find in a dirt house. The second engine amounts to about 4,000lbs that can be “spent” on more important stuff .. for you.

A widebody boat or even a sundeck may be a wiser choice for the soace they offer.

The salt in the bilge trick has a down side and that is corrosion of the fasteners becomes accelerated. A catch 22.

A downside to wood boats for a liveaboard is that wood boats are mostly old and old boats are mostly narrow. Quite narrow actually. The old Monk boats may be 2’ narrower than the GB’s. Even than the old GB’s. But older wood boats built by one of the “great” builders may likely be better than a newer wood boat.

Keep us a bit involved as you uncover rocks (so to speak) and don’t be hesitant to ask anything. I know your’e focused on GB’s but there are better boats than GB’s that may be better for a liveaboard or just plain better.
 
Older wood hulls will require more lay days.

Fiberglass hulls require light sanding and another coat of bottom paint. 1 to 2 days.

Older wood hull usually require more sanding before paint and there is always a plank or seam to repair.

Yep, like I said, an extra couple of days in labour and hardstand , so a few grand a year extra and this on our 60ft hull in Australia with high wages.
The sides of the wooden hull will need paint periodically.

The hull sides on an older fiberglass hull may be chalky but can be left that way
.

So a few more days.
Been there done that on our 60 ft hull.
Coarse sanding, spot priming and rolling enamel was much faster and far cheaper than the cost of fine sanding, filling, fairing, masking and spraying two pack polyurethane paint on our previous much smaller fiberglass catamaran.
 
My wood hull is copper plated. Felt and tar underneath. I haulout about every 3-5 years, but spend about half my time in fresh water and the rest in cold northern waters. When cruising, I try to spend some time anchored in rivers to kill any salt water growth. I have a diver check the bottom and change zincs every year or so.
It that more haulouts than fiberglass?





 
If the OP had any sort of wood boat experience, I would encourage him to buy the wood GB because I like wood boats and think they need to be saved/preserved.

But because the OP has little experience, he will either spend a lot of time learning to work on the wood boat or he will be writing a lot of checks to get the boat worked on or get overwhelmed by the enormity of what they got themselves into. I've seen too many people buy a wood boat and as the repairs add up, get discouraged because they can not do the repairs themselves or run out of money and sell the boat. And many give up boating after the experience.

I really like wood boats and spent my early boating days repairing, restoring and building wood sail boats. As I got older, I found that I enjoy boating more than working on them. My boat has a FG hull and glass over wood everything else. We've owned Sandpiper 19 years and I've replaced the boat deck, pilothouse roof, portugese bridge and repaired rotted wood on cabin sides. I have hundreds, maybe thousands of hours into these projects. Add in maintenance, rewiring and all the other work that is part of boating and that's a lot of work. These projects were done in my boathouse when I had time.

If I had a wood hull, who knows how many hours I'd spend on my back or knees repairing planks, caulking seams etc. Problems on the hull are have to's and the repairs need to be completed quickly because of the daily yard charges.
 
Last edited:
A lot of marinas will refuse to haul a wood boat. Liability due to rot causing damage while being hauled. I do love wood boats and planning to build a wood composite soon.
 
A lot of marinas will refuse to haul a wood boat. Liability due to rot causing damage while being hauled. I do love wood boats and planning to build a wood composite soon.

There are more and more marinas that even refuse to rent slips to wood boat owners.

I'm a former wood boat owner. Had a 1971, 37' Egg Harbor which in its day, was a popular, well built boat. In the first year I had it, 1998 I think, I spent over $10,000 in repairs and maintenance. I knew going into it, the boat needed maybe $2000 in work. Boy, was I wrong.

Never again.

Ever hear of Re-fastening? That is something wood boats have to do every 20-25 years. It is a dirty, time consuming, expensive project that fewer and fewer yards will do. If you are hell bent on buying a wood GB, find out the last time, if ever, it was re-fastened. If it is needed in the near future, plan on having a fat wallet ahead of time.
 
Whether you love wood boats or not, there are significant issues to deal with. As said before you may have a hard time getting hauled, you may have a hard time getting insurance, you may have a hard time finding a marina that will rent you a slip. I would never personally own a wood boat because of the above issues but also even though I love working on boats, I don’t want the work that comes with a wood boat besides the other maintenance with a fiberglass boat. YMMV.
 
In the mid-70's every boat manufacturer had to make the choice whether to continue using wood, or spend a boat load of money to re-tool for fiberglass production. Despite the required overhead investment they all switched to fiberglass.

wood boats
VHS tapes
coal furnaces
sun dials
morse code
inkwells
polaroids
phonographs

There's a reason these things don't exist.
 
wood boats
VHS tapes
coal furnaces
sun dials
morse code
inkwells
polaroids
phonographs

There's a reason these things don't exist.

Actually, the Weems and Plath S-O-S light is fairly popular, so Morse code is still alive.
I'm sure there are more than a few specialty boat builders who still work in wood.
There are more phonographs being made these days than most people realize as true music purists will only play them as opposed to digital reproduction.

That being said, as a former wood boat owner, never again.
 
ok..so "don't exist" was a poor choice of words. "aren't in mainstream use" would have been better. Sure...audiofiles will never give up their vinyl, and select boat builders will still use wood..Caligraphers will use inkwells, and kids in science class will still build sundials.....but progress has found better alternatives than these things for most people.
 
In the mid-70's every boat manufacturer had to make the choice whether to continue using wood, or spend a boat load of money to re-tool for fiberglass production. Despite the required overhead investment they all switched to fiberglass.

wood boats
VHS tapes
coal furnaces
sun dials
morse code
inkwells
polaroids
phonographs

There's a reason these things don't exist.


Wood is alive and well in the custom high tech composite boatbuilding world.

The Gougeon brothers of WEST epoxy fame revolutionized composite boat construction in the 70's and the method has kept up with current materials and technology.

Instead of expensive molds for mass production fiberglass boat construction, one off custom boats are built on traditional style temporary wood frames. The upside down frames are covered with diagonal layers of thin narrow wood strips set in epoxy. The hulls are covered on the outside with epoxy and exotic fabrics like Kevlar, Carbon fiber etc, turned over, temporary frames removed and interior covered in similar fashion to the interior. Sometimes the interiors are clear coated to let the wood show.

This type of construction is popular in large off shore racing sail boats. Wood is compared favorably to other coring materials for it's strength to weight ratio.
 
Last edited:
.

Ever hear of Re-fastening? That is something wood boats have to do every 20-25 years. It is a dirty, time consuming, expensive project that fewer and fewer yards will do.

People we know did their 65 footer , same build as ours but bigger, last year.
A few days in a shed, a few guys doing the job and about $5000 in bronze fasteners on their 2" thick planking.
She was about 45 years old.
Doesn't seem that big or expensive a job considering the price you buy in for.
 
People we know did their 65 footer , same build as ours but bigger, last year.
A few days in a shed, a few guys doing the job and about $5000 in bronze fasteners on their 2" thick planking.
She was about 45 years old.
Doesn't seem that big or expensive a job considering the price you buy in for.

Ok, $5000 in bronze screws, did they happen to mention the labor costs. I'm sure it was well north of $5000, at least if it was done the right way.
2 ways to re-fasten...the fast, cheap way, just put new screws in next to the old. The right way to do it...pull the wood plugs covering existing screws, remove the old, rusty screws and replace with new, one size larger screws and then, re-plug the hole. That's a whole lot of man hours and I can promise, the yard charges a lot more than minimum wage for this job. If it was done the right way, I'd be shocked if the labor was under $10,000 and I wouldn't be surprised to hear $15,000. Plus the cost of having the boat in a shed for a couple of days..$1000, maybe $2000.
 
Last edited:
Ok, $5000 in bronze screws, did they happen to mention the labor costs. I'm sure it was well north of $5000, at least if it was done the right way.
2 ways to re-fasten...the fast, cheap way, just put new screws in next to the old. The right way to do it...pull the wood plugs covering existing screws, remove the old, rusty screws and replace with new, one size larger screws and then, re-plug the hole. That's a whole lot of man hours and I can promise, the yard charges a lot more than minimum wage for this job. If it was done the right way, I'd be shocked if the labor was under $10,000 and I wouldn't be surprised to hear $15,000. Plus the cost of having the boat in a shed for a couple of days..$1000, maybe $2000.

And I thought Australia had the highest prices for labour.
I know they got a deal on the shed, not what you know its who you know and I dare say the same on the labour.
I reckon they wouldn't have paid much more than $12k including the screws, that's about $8500 usd

That's working on about $50/hour for labour which I am sure is a hell of a lot more than your minimum wage and more than double ours.
 
Marine labor rates here go from 90 to 110 per hour, nothing like 50.
 
Marine labor rates here go from 90 to 110 per hour, nothing like 50.

Plenty of big yards here will charge that sort of coin and the workers never see anything like it.
Skilled guys working for themselves charge considerably less.

We're wanting to get ours up north to Thailand.
There, skilled workers employed by a big yard will cost me about $70/day
Grunt labour about half that
 
Last edited:
There are more and more marinas that even refuse to rent slips to wood boat owners.

I'm a former wood boat owner. Had a 1971, 37' Egg Harbor which in its day, was a popular, well built boat. In the first year I had it, 1998 I think, I spent over $10,000 in repairs and maintenance. I knew going into it, the boat needed maybe $2000 in work. Boy, was I wrong.

Never again.

Ever hear of Re-fastening? That is something wood boats have to do every 20-25 years. It is a dirty, time consuming, expensive project that fewer and fewer yards will do. If you are hell bent on buying a wood GB, find out the last time, if ever, it was re-fastened. If it is needed in the near future, plan on having a fat wallet ahead of time.

I'm up on tradtional boat building. I've been around wood boats being repaired. As much as I like working with wood, I would never own an older traditional built wood boat. The upkeep alone would be overwhelming at times.
 
The wood boat designs that I am narrowing down are plywood over sawn frames. There's a minimum for fiberglass and epoxy sheathing on the outer hull. I plan to use my boat for some serious long range cruising so I will opt for addition fiberglass and epoxy coating the entire structure to keep moister away from the wood as much as possible. Prep work for priming and painting with epoxy and fiberglass goes a long way to keep water out of wood. This won't be my first boat with wood and epoxy together. I've done many deck and stringer jobs in boats. What a pain those can be.
 
Back
Top Bottom