View Single Post
Old 06-15-2019, 07:43 AM   #13
Ski in NC
Technical Guru
 
Ski in NC's Avatar
 
City: Wilmington, NC
Vessel Name: Louisa
Vessel Model: Custom Built 38
Join Date: Jan 2014
Posts: 6,194
Really can't tell much til you get the motor out and torn down. It's got to come out anyway and get flipped to do cam stuff.

Suspect a cam bearing or even crank main bearing shell was installed wrong, blocking oil flow.

Maybe too much sealant on a head gasket blocked an oil hole?

But you seem to have confirmed that cam/follower geometry is screwed up, so that means a motor pull.
Ski in NC is offline   Reply With Quote