View Single Post
Old 05-30-2019, 12:35 PM   #12
syjos
Guru
 
syjos's Avatar
 
City: Gig Harbor
Country: USA
Vessel Name: Sandpiper
Vessel Model: Bluewater 40 Pilothouse Trawler
Join Date: Nov 2012
Posts: 735
Pic 1.The previously laminated front corners trimmed and ready to install

Pic 2. Laminated corner glued and rest of roof trim being installed.

The trim on the sides are mounted at a slight angle and the front and back trim are at a greater angle. The beveled curvature at the front and back were done with a router and a pattern. The side bevels with router and straight edge.

3. Roof edge trim being glued on. The total thickness of the roof where the edging attached is 2". Two layer 1/2" plywood roof + 1/2" plywood reinforcement under the overhangs + the 1/2" plywood drip edge. Which is enough surface for the edging to attach.

4. Roof edges almost done. Two small sections to go where the roof narrows towards the back. Next fairing and glassing.
Attached Thumbnails
Click image for larger version

Name:	9 (1) (Medium).jpg
Views:	43
Size:	76.6 KB
ID:	89508   Click image for larger version

Name:	9 (15) (Medium).jpg
Views:	46
Size:	73.5 KB
ID:	89509   Click image for larger version

Name:	9 (25) (Medium).jpg
Views:	44
Size:	66.4 KB
ID:	89510   Click image for larger version

Name:	9 (27) (Medium).jpg
Views:	42
Size:	76.8 KB
ID:	89511  
syjos is offline   Reply With Quote