Counts
Member
Hi
Based in Auckland, New Zealand and have just joined.
I see some previous coro on this subject but thought I would run it past you guys and see what turns up.
I am using Valvoline SAE 30 mono trans oil for my Twin Disc MG-5050A's.
I recently had a service and an oil change on engines and trans. Used boat on a marlin hunt thereafter which was for about 15 hours steaming and the trans oil is already showing signs of blackening.
So question that I have is there a better brand same grade oil to consider or perhaps go to a different SAE grade ?
Appreciate the feedback
Cheers
Based in Auckland, New Zealand and have just joined.
I see some previous coro on this subject but thought I would run it past you guys and see what turns up.
I am using Valvoline SAE 30 mono trans oil for my Twin Disc MG-5050A's.
I recently had a service and an oil change on engines and trans. Used boat on a marlin hunt thereafter which was for about 15 hours steaming and the trans oil is already showing signs of blackening.
So question that I have is there a better brand same grade oil to consider or perhaps go to a different SAE grade ?
Appreciate the feedback
Cheers