Mainship Pilot 34 Engine gauges to NMEA 2000

Tonic1 · May 9, 2019

I have recently completed a project replacing the analog gauges on my twin engine 2007 Mainship Pilot 34 and converting to NMEA 2000 digital gauges. I have written this up in some detail with lots of pictures in the attached PDF. Here is a picture of the finished product.

Dougcole · May 9, 2019

That looks really good. Thanks for posting.

I'm having some issues with one of my tachs as well. How did you find/fix the loose ground pin?

Pau Hana · May 9, 2019

Very nice!

Tonic1 · May 9, 2019

Because the issue was affecting both tachs, I figured that it must be on the ground side since that is the only thing the 2 tachs have in common. I then just played with the ground connections until I found the problem connection. When I tightened the connection the entire post turned. I had to play with it to get it "just right".

Tonic1 · May 9, 2019

Pau Hana said:
Very nice!

Thanks for the compliment and for the help you provided through your post. Paying it forward.

Mainship Pilot 34 Engine gauges to NMEA 2000

Tonic1

Senior Member

Attachments

Dougcole

Guru

Pau Hana

Guru

Tonic1

Senior Member

Tonic1

Senior Member

Similar threads

Latest posts