GordC
Veteran Member
- Joined
- Jan 12, 2014
- Messages
- 38
- Location
- Canada
- Vessel Name
- Meander
- Vessel Make
- 1981 Grand Mariner 40
I have installed Marine Elegance fresh water toilets in both heads some years ago and think they are great. The flush motor on the newer one which is 7 years old started getting really loud a few years ago. I checked the impellor last year and all was good. Last week the flush motor stopped working so I took it apart. It had a lot of shall we call "water" and corrosion in it. The bearings were sloppy and the brushes were seized which is probably why it stopped working. So because of a failed shaft seal which is worth a few dollars I am stuck with paying hundreds for a new motor. My question is has anyone had the same experience.