Magnum Inverter controller

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
fryedaze said:
Has anyone ever dealt with this. Everything appears to be operating correctly.



https://youtu.be/eyAKUD7Ls1A
Click to expand...



Not that particular issue but my Magnum monitor started to act up in other ways - buttons not working consistently, etc... Bought and installed a new monitor and all fixed. Not a terribly expensive item. Available on Amazon. Might give it a try.
 
If you have a BMK, unplug the power for about 15 mins and see if it clears it. Otherwise it may be a new unit. I have had to replace mine. Magnum technical support are pretty good during working hours. They may suggest taking the unit apart and cleaning it because sometimes bits of dirt get behind the buttons. Not a big job just remove the unit and the rotary button Nd then unscrew the back.
 
Yep, mine's been doing that for almost a year. I took it apart & cleaned with contact cleaner everything I could get to, it made a significant improvement on the pushbuttons, but the display still occasionally goes spastic like the one in the vid. I did speak to tech support, they said if cleaning doesn't remedy it, replacing it will. eBay, somewhere ~ $130. It's on my list for haul time. Growing...:eek:
 
You must log in or register to reply here.

Similar threads

JDCAVE
Nuisance trips, 2 amp fuse, Magnum Energy “ME-BMK/ME-BMK-NS Battery Monitor Kit”
Replies
6
Views
227
DDW
D
mvweebles
Magnum inverter - brief drop-out
2
Replies
50
Views
3K
rslifkin
R
Osprey69
Replacing Xantrex with Magnum Issues...
Replies
6
Views
921
Osprey69
Osprey69
Osprey69
Installing Inverter "Upside Down"?
Replies
16
Views
2K
Steve DAntonio
Steve DAntonio
T
Getting Victron Multiplus 12/3000/120 information on NMEA 2000 network
Replies
3
Views
253
Barking Sands
Barking Sands

Latest posts

Back
Top Bottom