FF
Guru
- Joined
- Oct 12, 2007
- Messages
- 22,552
The time has come that no amount of cleaning will help.
Any suggestions for painting plastic cowl vents from Nico Fico or Vetus?
Any suggestions for painting plastic cowl vents from Nico Fico or Vetus?
refinishing cowl vents
- Thread starter FF
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
RT Firefly
Enigma
Greetings,
Mr. FF. I've used Krylon products with good success in the past. https://www.krylon.com/products/fusion-allinone
Was looking for a 1 gal plastic can for diesel but unable to find a yellow one. Painted a red with Krylon yellow and it's still like new in spite of diesel drips on surface.
Mr. FF. I've used Krylon products with good success in the past. https://www.krylon.com/products/fusion-allinone
Was looking for a 1 gal plastic can for diesel but unable to find a yellow one. Painted a red with Krylon yellow and it's still like new in spite of diesel drips on surface.
O C Diver
Guru
- Joined
- Dec 16, 2010
- Messages
- 12,867
- Location
- USA
- Vessel Name
- Slow Hand
- Vessel Make
- Cherubini Independence 45
I have spray painted plastic several times with good results. I found that cleaning the surface and then hand sanding it with very fine sandpaper, gave the paint a good surface to stick to.
Ted
Ted
