Thread: Bilge Paint
View Single Post
Old 02-27-2019, 05:47 PM   #14
City: Seaford Va on Poquoson River, VA
Country: United States
Vessel Name: Old Glory
Vessel Model: 1970 Egg Harbor 37 extended salon model
Join Date: Jan 2016
Posts: 2,185
I have been impressed with Rustoleum Bull's Eye Primer. I painted one side of the aft bilge with it and it also survives fine under rain water that can sit in there for long times. I never did topcoat the primer. I used a cheap brush, cleaned it up best I could and slathered it on. It still looks flat white like I just applied it after 6 months. It takes several coats to get good coverage if your not planning on a topcoat. Someday I may topcoat it with an acrylic latex.

Water-base primer-sealer
Interior and exterior
Sticks to all surfaces without sanding
Seals stains, graffiti and tannin bleed
Mold & mildew resistant film
Rust inhibitive – great for new metal
Fast 1 hour dry time
35F low application temperature

They have the older classic formula which is better, the newer one (plus version) if paint sits in can gets lumpy, not worth paying the higher price.
sdowney717 is offline   Reply With Quote