SailorBruce
Member
Last night I ran the water tank dry while in the shower. The only good thing about the scenario is that it was me, and not my wife, with unrinsed soap....
When I filled the tank, just as I’ve done several times in the past, (pump breaker off, run out hoses, fill tank, breaker on) the pump won’t stop cycling. The pressure builds up to about 48PSI at the accumulator, but never goes higher. I have opened all of the sinks and flushed all of the heads thinking I might have air trapped in the lines but to no avail. My next step was to look at the pump for an issue, but I can’t figure out where to start. Can anyone help identify the pump in the photo?
What do people think my next step should be?
Thanks in advance!
When I filled the tank, just as I’ve done several times in the past, (pump breaker off, run out hoses, fill tank, breaker on) the pump won’t stop cycling. The pressure builds up to about 48PSI at the accumulator, but never goes higher. I have opened all of the sinks and flushed all of the heads thinking I might have air trapped in the lines but to no avail. My next step was to look at the pump for an issue, but I can’t figure out where to start. Can anyone help identify the pump in the photo?
What do people think my next step should be?
Thanks in advance!
Attachments
Last edited: