Choices
Guru
- Joined
- Apr 16, 2018
- Messages
- 898
- Location
- Montgomery, Tx
- Vessel Name
- Choices
- Vessel Make
- 36 Grand Banks Europa
My boat does not have a fuel polishing set up, and burns fuel so slow I would like to add one.
Below is my layout in black. Red is what I would like to add for the polisher.
My plan is to use a Walbro 12v pump plumbed after a Raycor 500 with a vacuum gauge, that will keep spare parts easy.
There is a threaded port in the manifold, so I can nipple off of that and mount everything to the back of the manifold structure.
Each tank has a threaded tap at the top of the tank that is nipple blocked, that will be my return. I will always return fuel to the same isolated tank.
I think I can control where it goes and isolate each tank this way.
See any problems?
Below is my layout in black. Red is what I would like to add for the polisher.
My plan is to use a Walbro 12v pump plumbed after a Raycor 500 with a vacuum gauge, that will keep spare parts easy.
There is a threaded port in the manifold, so I can nipple off of that and mount everything to the back of the manifold structure.
Each tank has a threaded tap at the top of the tank that is nipple blocked, that will be my return. I will always return fuel to the same isolated tank.
I think I can control where it goes and isolate each tank this way.
See any problems?