I need to replace an inspection port located in the cockpit area over the engine area.
The glass is hazed and needs to be replaced. Not knowing if the glass is bonded to the frame, looking at replacing the whole unit.*The OD is approx 6 1/2" x 4" ID, thickness appears to be 1/8" above gelcoat.
Any idea where one can be found?
*
The glass is hazed and needs to be replaced. Not knowing if the glass is bonded to the frame, looking at replacing the whole unit.*The OD is approx 6 1/2" x 4" ID, thickness appears to be 1/8" above gelcoat.
Any idea where one can be found?
*