View Single Post
Old 10-24-2018, 04:42 PM   #2
Veteran Member
Ftbinc's Avatar
City: Chicago
Vessel Name: Oma
Vessel Model: Manatee
Join Date: Sep 2016
Posts: 83
Spoke with the boat yard today and they suggested a 1/2-3/4 inch pipe through the toe rail at the low point.
Also, with regards to the water dripping on the cap rail - the boat yard's suggestion was to router a "Drip edge a 1/4 inch back from the edge on the under side of the upper trim piece. I am planning on doing both of these projects (I'm letting the yard do the fiberglass work, just in case the screw it up... the routing im planning on using the router attachment for my dremeil tool.

Has anyone else done either of these fixes?

Ftbinc is offline   Reply With Quote