Quote:
The boat is a 240 Volt, it has two lines in each 16 Amp and I just user one and parallel the two on the fuse control box,
|
Just to be sure we are on the same page, is your boat wired to a USA standard? If so, is it two 30A/125V (each inlet has hot, neutral and safety ground) inlets or a single 50A/250V (the inlet has hot #1, hot #2, neutral and safety ground inlet?
The typical European shore power is 16A/230V with hot, neutral and safety ground so there could be a mismatch between the shore power being provided and how the panelboard is wired.