Quote:
Originally Posted by Bare Necessities
I blew on the line out of desperation and I could see a little seeping out of the Racor filter between the top part and the bottom part. I had not previously had it apart but I took it apart and put a new "O" ring between the top and bottom. Solved the problem. The old "O" ring did not look bad but it was hard. If you determine whether it is fuel or some other sensor would be my suggestion. I hope I made sense in my description of what I did. It was frustrating because where it was sucking air, there was no fuel leak until I blew on the line.
|
I will certainly try this tonight. The reason I did not suspect the Racor, because I have changed the filter and O ring just about a month ago. I will get new O ring in and see what happens.
How did you blow the fuel line?