Bigsfish
Guru
- Joined
- Aug 29, 2016
- Messages
- 2,987
- Location
- USA
- Vessel Name
- Gotcha
- Vessel Make
- Grand Banks. Heritage. 54
I’m looking for a pump (110 vt) to pump out my bilge when I get a lot of water in it (leaky shaft seals). I would like to permanently mount the pump about three feet above the water so it must be self priming (waterproof might help just in case), it should be possible to run dry as when the water gets sucked out and I would like to use a simple hose to pump the water out through the rear engine hatch. Need reliability as hopefully it won’t be used often.
I know many of you know exactly what I need so send me your suggestion.
Thanks in advance.
I know many of you know exactly what I need so send me your suggestion.
Thanks in advance.