geoshep
Member
- Joined
- Aug 3, 2018
- Messages
- 6
- Location
- canada
- Vessel Name
- Alastair B
- Vessel Make
- 40' classic trawler
I have a 1982 trawler with twin 120 lehmans. Im new to the boat. All my fuel valves are in open flow position including splash return valves. when I dip tanks its always port tank that consumes fuel. I can motor say 12 hours and starboard tanks may be down an inch, port tank down 5 inches, this is from both tanks full and measured. Were these tanks not designed with a crossover valve. Is this common. Thanks for opinions.