NightCrawler
Senior Member
- Joined
- Feb 17, 2016
- Messages
- 211
- Location
- USA
- Vessel Name
- Previous owner GB 42 Classic
- Vessel Make
- Currently running a 23' CC
50+ Marina's. Never ran into this. Shopping a splitter. Suggestions?
250v 50A boat 125v 50A dock power
- Thread starter NightCrawler
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
caltexflanc
Guru
What marina? The only place I recall running ito 50/125 was Watch Hill LI. The park docks there had adapters. Whatever marina you are talking about will tell you exactly what you need. Hibbel and Marinco all make them. A 30 amp 125 "Smart Y" will work if you have two out of phase outlets on the dock.
dhays
Guru
- Joined
- May 26, 2015
- Messages
- 9,045
- Location
- United States
- Vessel Name
- Kinship
- Vessel Make
- North Pacific 43
My 125v/50A boat is currently plugged into a 125v/50A pedestal at my home dock.
OP
OP
NightCrawler
Senior Member
- Joined
- Feb 17, 2016
- Messages
- 211
- Location
- USA
- Vessel Name
- Previous owner GB 42 Classic
- Vessel Make
- Currently running a 23' CC
Sandusky Harbor Marina. All their adapters are splitters 125 50A to two 30A plugs. Our 30 to 50 fancy dancy Marinco splitter from 30A to one 50A plug doesn't like it.
No 240v appliances.
No 240v appliances.
Last edited:
O C Diver
Guru
- Joined
- Dec 16, 2010
- Messages
- 12,867
- Location
- USA
- Vessel Name
- Slow Hand
- Vessel Make
- Cherubini Independence 45
I had the same problem with my Hubbell one. If you don't have any 220 appliances, the below unit works great. This unit lacks the electronics to protect the 220 appliances if the 2 30 power plugs on the dock pedestal are the same phase.
https://www.amazon.com/gp/aw/d/B01KLA4PJ0?psc=1&ref=yo_pop_mb_pd_title
Ted
OP
OP
NightCrawler
Senior Member
- Joined
- Feb 17, 2016
- Messages
- 211
- Location
- USA
- Vessel Name
- Previous owner GB 42 Classic
- Vessel Make
- Currently running a 23' CC
Ted, thank you. Guess I went too high tech.
Anyone need a really slick splitter? Will follow up on the suggestion. Again, thank you.
Similar threads
