Thread: Teak Railings
View Single Post
Old 11-23-2011, 09:59 PM   #16
CPseudonym
Guru
 
City: Hotel, CA
Join Date: Sep 2011
Posts: 8,323
RE: Teak Railings

Quote:
Forgive my ignorance, but in the second picture showing the power cords is that a custom made cord lifter or is it off the shelf? Wife and I have toured many marinas lately and have not seen anything quite so clean for the purpose.
Quote:
Moonstruck wrote:
Quote:
Like Marin I use Bristol Finish on my outside teak.* The last time it was coated was in August of '07.* 9 coats in 2 days time.* It still looks good, but I will probably do about 3 maintenance coats in the next few months.* That should take 1 day to mask off and buff over with a Scotchbrite pad and 1 day for putting on the finish.* It is the best system that I have used.* The boat has spent time in Maryland, South Carolina, and Florida.* I have used sikens, teak oil, Cetal, and a number of other finishes over the years.* By far the best results and looks have come with using Bristol.* It looks and shines like varnish.* The photos were made within the last couple of months.



-- Edited by Moonstruck on Wednesday 23rd of November 2011 09:45:54 PM



-- Edited by Moonstruck on Wednesday 23rd of November 2011 09:54:47 PM
*
CPseudonym is offline   Reply With Quote