Quote:
Originally Posted by dhays
I mentioned how the PO had setup some line storage on Kinship, but here is a photo. You can see the three small SS eyes that are screwed into the hatch. There are small bungees that were trapped in the center eye and used to hold the lines against the hatch cover when closed. The lines have never come off and there is enough ventilation in the hatch that they always dry out nicely.
Attachment 76498
|
Yes, I think that's the route we're going to take as well. The use of bungees to help hold them up, and being hung from hooks should offer the least complicated way to store and retrieve them. Coil them as per usual, on a hook and then snap the bungee across the lower section. The only downside/question is how many hooks. A rail would allow more, but then we're back to tying them off.
Of course in digging through various hatches I discover one or two are missing their little cam that holds them down to the deck. Looks like I'll have a few pieces to get from
Izerwaren. That and the gas lift strut on one has quit.