Quote:
Originally Posted by Mkeller
Exactly what it is. If you cant find it locally, american diesel has the fitting with a barb for 1/4” hose.
|
Should be a brass fitting screwed into it, then maybe a 90 elbow, finally the fuel return hose. Hose could be a braided with screw fitting or rubber that would fit over a barb.
There must be a loose hose somewhere not connected to anything. Fitting must have loosened due to vibration. It might be on the end of the hose. Just screw it back in. If not, the fitting must be rolling around in the bilge. Mirror and flashlight will be helpful locating it.