cardude01
Guru
- Joined
- Nov 26, 2012
- Messages
- 5,290
- Location
- USA
- Vessel Name
- Bijou
- Vessel Make
- 2008 Island Packet PY/SP
I have a Maspower 8kw generator with a Yanmar 3TnV76. Have not run the gen in three months. Tried to start it today using the remote panel like I usually do. It started up and ran for a few seconds (and sounded normal) and then died before I could get to the stern to check water flow. . I looked at the panel on the gen and the “turtle” light was flashing and the oil light was on.
Checked the oil and water and they are good.
Any ideas?
Checked the oil and water and they are good.
Any ideas?