View Single Post
Old 12-13-2017, 08:50 PM   #9
C lectric
Guru
 
C lectric's Avatar
 
City: B.C.
Country: Canada
Vessel Name: Island Pride
Vessel Model: Palmer sedan 32'
Join Date: Oct 2007
Posts: 2,185
It broke. I can see the telltale tip.

The corner should not have been left as a sharp inside corner.

Both Plexi and Lexan are notch sensitive, Lexan less so, so sharp corners like that can be trouble and cause breakage.

A good radius such as from a hole saw and then some sanding to smooth the cut may have prevented the break.

Even just a small support backup block at the corner may have prevented the break.
C lectric is offline   Reply With Quote