One of the fill caps treads have wear to the very fine thread points, it’s difficult to remove or screw back into the fitting. It still seats tight using the top thread or two but to remove it requires gripping with finger tips and slowly turning.
Looking for anyone with a spare fitting, cap or replacement ideas. The opening is about 1 5/8” and the tube reduces down to about 1” probable all metric sized to the tank fill hose.
Bill
Looking for anyone with a spare fitting, cap or replacement ideas. The opening is about 1 5/8” and the tube reduces down to about 1” probable all metric sized to the tank fill hose.
Bill
Attachments
Last edited: