Deadrise of Grand Banks 36 Classic?

parobellum · Nov 13, 2017

I am looking at Raymarine RV-2xx transducers that come in three types, 0 degree (flat), 12 degree and 20 degree - to account for deadrise. the RV212 is for 5-15 of deadrise, RV220 for 15-25 of deadrise - any idea what would be appropriate for Grand Banks 36 Classic - placement is about 12 ft back from bow.

AusCan · Nov 13, 2017

The angle would depend how far off centre you are placing it as well.

Can you not measure the angle from where you plan to install it on the inside of the hull prior to slipping the boat?

You can get an free angle meter app for any smartphone. That way you would be sure it is the angle for where the transducer will be located.

Bob Cofer · Nov 13, 2017

It’s roughly 7 degrees.

Marlinmike · Nov 13, 2017

You can also mount internally as well, look into that, had install a few like this with good luck.

Deadrise of Grand Banks 36 Classic?

parobellum

Newbie

AusCan

Guru

Bob Cofer

Guru

Marlinmike

Guru

Similar threads

Latest posts