View Single Post
Old 09-28-2017, 03:37 AM   #27
BruceK
Guru
 
BruceK's Avatar
 
Join Date: Oct 2011
Posts: 7,561
Quote:
Originally Posted by Xsbank View Post
If you plan to connect or disconnect, do it at night or cover the panels. My panels have a warning sticker on them saying much the same.
I have thought that. But the Manual for my PWM controllers says that to adjust settings, remove all connections except the connection to the battery.
I`ve done it that way to make adjustments, all went well,with batts uncovered, so less sure about that warning .
Fairly sure this came up on another thread and it was said that once a connection to a battery was removed, generation stopped (think it was Brian/Insequent who is knowledgeable on panels). I also wondered where the amps went when the regulator finds the batts are full, as mine often are. The panels must still be generating, but I think Brian had the answer, and quoted someone authoritative.
__________________
BruceK
Island Gypsy 36 Europa "Doriana"
Sydney Australia
BruceK is offline   Reply With Quote