View Single Post
Old 09-18-2017, 05:31 PM   #1
sdowney717
Guru
 
City: Seaford Va on Poquoson River, VA
Country: United States
Vessel Name: Old Glory
Vessel Model: 1970 Egg Harbor 37 extended salon model
Join Date: Jan 2016
Posts: 2,136
Repairing the framing under the teak deck aft

I have an album setup.
This is a job I wanted to do couple years ago. I did the starboard side 2 years ago, and it has been good.
I am using PT lumber, has very few knots.
I have done extensive rebuilding on this boat, and anywhere structural I used PT SYP wood, carefully selected.

Another good product is PL Premium Polyurethane CA.
Sometimes I mix it with sawdust as a filler.
https://photos.app.goo.gl/ePYqVq5nobr2VNcg1



This structure is incredibly strong when in good condition. It is a solid 6 inches thick in width, and has a curve. Then 3/4 plywood lays down into the groove formed by the support piece not shown here. And teak boards attach to the top.
sdowney717 is offline   Reply With Quote