Mach_cat
Veteran Member
The previous owner installed a red dot heater. That is the good news, but it is higher than the engine coolant system. He did not install a resivour tank above this point so I have air in my system. Looking online I can find lots of pressure resivours for cars but they are all strange shapes. Just looking for a simple square tank. Anyone done this and found a good tank.
This is not an overflow tank, it is pressurized. When done this way you no longer fill the radiator at the engine only use the aux tank. If you remove the cap at the engine, you are at low point and the coolant comes out.
This is not an overflow tank, it is pressurized. When done this way you no longer fill the radiator at the engine only use the aux tank. If you remove the cap at the engine, you are at low point and the coolant comes out.
