Thru Hull ID

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
Tator

Tator

Guru
Joined
Feb 16, 2015
Messages
514
Location
United States
Vessel Name
Oz
Vessel Make
Bluewater 40' RPH 1979
I need help in identifying the ball valves on my mains. There appears to be no brand name just a symbol of what appears to be a three pointed crown and the rating of 150s 600wog. Any ideas?

Thanks, Tator
 
Sorry, besides being photo challenged the three pointed crowns would be difficult to access. Had to use a mirror to even make then out.

Tator
 
Wilcox Crittenden, I think.
They made good quality stuff. Top flight stuff.
The name is still around but the mfg. was purchased by Thetford I believe, some years ago, and the actual equipment is no longer made.

I used to have some of their equipment 2 boats ago.


The 150 I suspect is the size, 1.5"
The 600 WOG is water,oil,gas meaning it is suitable up to 600PSI in use with those materials/fluids.
 
Last edited:
I don't think Wilcox- Crittenden ever made ball valves.
Their seacocks were the tapered cone type. Their logo was a letter W inside a Letter C. Might be confused for a crown, but probably not.
 
I have some Wilcox Crittenden hdw and the valves have a different symbol.
 
Wilcox_Crittenden_tag.jpg


WC logo
http://www.milesstair.com/lamps/Wilcox_Crittenden_tag.jpg
 
You must log in or register to reply here.

Similar threads

S
Thoughts on pipework for bilge thru hulls
2
Replies
49
Views
3K
sndog
S
J
Seacock strainer
2
Replies
40
Views
2K
kapnd
kapnd
S
Bilge pump lines from pump to thru hull
Replies
10
Views
1K
sndog
S
C
Fuel Tank Mystery
Replies
17
Views
1K
Greg QS
Greg QS
JHeide
Electronic thru Hulls
Replies
11
Views
1K
catalinajack
catalinajack

Latest posts

Back
Top Bottom