Need help 34 ft Tollycraft cutlass bearings

tradersport · Jul 7, 2017

Hello all,
I am replacing my cutlass bearings on a 1985 34 ft Tollycraft.
The boat will be hauled this week but I wanted to pre order the bearings.
The shaft size at the packing gland is 1.25 inch diameter. Does anyone know the cutlass bearing ID and OD for this boat?

Max
Hana Hou.

RT Firefly · Jul 7, 2017

Greetings,
Welcome aboard.

tradersport · Jul 7, 2017

Thanks, I am new to this forum. Is this the best place to post my question?
Max.

RT Firefly · Jul 7, 2017

Greetings,
Mr. t. Most any or all of your questions will be read. As to answers....?

Ski in NC · Jul 7, 2017

Unless someone has the exact boat, that OD measurement would be a guess. Jump in the water with a caliper and measure it.

kchace · Jul 7, 2017

Yeah like Ski said, the ID will be the same as your shaft but cutlass bearings can be had in at least 2 different shell thicknesses which would definitely change the OD. Gotta be measured.

Ken

Keysdisease · Jul 8, 2017

All standard bearings seem to be 5" long. 4 OD sizes:

1-1/4 inch 1-1/2 inch 5 inch
1-1/4 inch 1-3/4 inch 5 inch
1-1/4 inch 2 inch 5 inch
1-1/4 inch 2-1/8 inch 5 inch

:socool:

hfoster · Jul 8, 2017

tradersport said:
Hello all,
I am replacing my cutlass bearings on a 1985 34 ft Tollycraft.
The boat will be hauled this week but I wanted to pre order the bearings.
The shaft size at the packing gland is 1.25 inch diameter. Does anyone know the cutlass bearing ID and OD for this boat?

Max
Hana Hou.

You may try contacting me Irish Bro Art. He has a 34 Tollycraft and is pretty hipped to the Tollycrafts as well.

Cheers.

H.

Need help 34 ft Tollycraft cutlass bearings

tradersport

Newbie

RT Firefly

Enigma

tradersport

Newbie

RT Firefly

Enigma

Ski in NC

Technical Guru

kchace

Guru

Keysdisease

Guru

hfoster

Guru

Similar threads

Latest posts