Quote:
Originally Posted by Seevee
Good point, it's a matter of how big a back plate under the deck would work. I'll have a engineer friend of mine check it out.
The one with the supports a few posts up could be an idea.
|
Im a design engineer
Its not what size plate under the davit its whats holding the davit up from underneath and where that extra weight is been transferred to . The weight should be transferred vertically to the deck but whats holding the deck up
We make a living from making simple things hard
I did look at doing the same on my IG32 the dingy gets in the way of casting when fishing but I binned the idea too much heart ache for so little gain