HeatherAlyssa
Senior Member
- Joined
- Mar 11, 2017
- Messages
- 217
- Location
- United States
- Vessel Name
- Heather Alyssa
- Vessel Make
- Mainship 350/390
After ensuring my power panel is on, one of my bilge pumps will not operate when I flick the switch to the "Auto" or "Manual" position. All three pumps worked prior to winter lay up, but now the light on the panel for the one inoperative pump doesn't illuminate either. I'm wondering if someone could help me with this. If the pump is the failed part, shouldn't the light on the power panel still illuminate? I'm sure it isn't the bulb because the pump does not come on when I activate the switch. I'm wondering if the light not coming on is an indication that it could be a switch or breaker issue.
Thanks,
Alex
Thanks,
Alex