Pack Mule
TF Site Team
- Joined
- Jan 24, 2013
- Messages
- 3,749
- Location
- USA
- Vessel Name
- Slo-Poke
- Vessel Make
- Jorgensen custom 44
The engine was running about 195 to 200 at 1800 rpms so I decided to change impeller . 4 of the 8 vanes were shot . I fished everything out of the oil cooler and changed impeller . Now I can't get any water out of exhaust . Does this Jabsco pump need to be burped or primed? I have water standing in the pump but can't get it past the pump . I took the small hose off at the exhaust elbow and filled with water but not pumping any water . I've changed impeller before and no issues . The thru hull is open .
Last edited: