View Single Post
Old 04-08-2017, 01:37 PM   #1
Pack Mule
TF Site Team
 
Pack Mule's Avatar
 
City: Paris,TN
Vessel Name: Slo-Poke
Vessel Model: Jorgensen custom 44
Join Date: Jan 2013
Posts: 3,749
Impeller problems Perkins

The engine was running about 195 to 200 at 1800 rpms so I decided to change impeller . 4 of the 8 vanes were shot . I fished everything out of the oil cooler and changed impeller . Now I can't get any water out of exhaust . Does this Jabsco pump need to be burped or primed? I have water standing in the pump but can't get it past the pump . I took the small hose off at the exhaust elbow and filled with water but not pumping any water . I've changed impeller before and no issues . The thru hull is open .
__________________
Marty
Pack Mule is offline   Reply With Quote