View Single Post
Old 06-23-2011, 05:44 AM   #11
Anode's Avatar
City: Missourah
Country: USA
Vessel Name: M/V Scout
Vessel Model: Sundowner Tug 30'
Join Date: Jul 2010
Posts: 645
RE: Before and After

Thanks folks! Scout is still a work in progress.

Lots of window fabricators out there but very few will weld up square cornered windows. Most bend radius corners.

I used WaterWaySystems.*. My contact was the owner Chuck. He was very responsive to all my questions via email and the phone calls besides making a very nice product. I think I may have drove him a bit crazy with all my questions.

I replaced all 14 windows in Scout. Three windshield (center tilts out).*Four *fixed pilothouse side windows. Two fixed pilothouse aft windows. Four sliding salon windows and one tilt salon aft window.* Windows were sized to fit the existing interior trim. Cost was a little under $8000 for the windows and shipping. Buying them was the easy part.

I also added two hatches to the pilothouse roof for additional ventilation.

Here's a couple more pictures.
Attached Thumbnails
Click image for larger version

Name:	windscreen.jpg
Views:	73
Size:	104.6 KB
ID:	6390   Click image for larger version

Name:	hatches.jpg
Views:	66
Size:	138.8 KB
ID:	6391  
Anode is offline   Reply With Quote