Al
Guru
- Joined
- Apr 1, 2012
- Messages
- 2,206
- Location
- usa
- Vessel Name
- 'SLO'~BELLE
- Vessel Make
- 1978 Marben-27' Flybridge Trawler(extended to 30 feet) Pilothouse Pocket Cruiser[
Greetings- Sought out threads related to this subject. While there are threads of installing pads, those relate to Hypalon.
New glue, old glue- What ever, I used the correct glue available dated within the past year. Followed all the instructions, called Weaver several times to confirm my status in the process. So in my mind it was a successful installation. The stand off pads, and the second mount pad are without fault. So- Now I have a pad lifting and before it becomes a major issue will ask if there are some solutions to take under consideration.
To the best of my knowledge and my seeking on the internet, articles or directions to removing such a flawed Weaver pad is non-existent for PVC material.
From Hypalon, yes, heat works,
Thanks for taking an interest.
Al-Ketchikan
New glue, old glue- What ever, I used the correct glue available dated within the past year. Followed all the instructions, called Weaver several times to confirm my status in the process. So in my mind it was a successful installation. The stand off pads, and the second mount pad are without fault. So- Now I have a pad lifting and before it becomes a major issue will ask if there are some solutions to take under consideration.
To the best of my knowledge and my seeking on the internet, articles or directions to removing such a flawed Weaver pad is non-existent for PVC material.
From Hypalon, yes, heat works,
Thanks for taking an interest.
Al-Ketchikan