View Single Post
Old 01-21-2017, 02:52 PM   #16
psneeld's Avatar
City: Avalon, NJ
Country: USA
Vessel Name: Freedom
Vessel Model: Albin 40
Join Date: Oct 2011
Posts: 17,882
It would be pretty easy if you already have a saltwater wash down system.

I have a wash down system. so I added a small 12V solenoid valve plumbed to the wash down system and wired in with the flush switch.

Instead of teeing into the flush, can you just disconnect the fresh and connect the salt so there's no chance of cross contamination?

As long as the water pressure is maintained on one side of the solenoid valve, doubt the extra pressure would affect the head. It should be free lowing at that point as long as the hose goes straight to the bowl flush rather than some internal valve.

That is where it might get tricky depending on which head you have.
psneeld is online now   Reply With Quote