Tom.B
Moderator Emeritus
- Joined
- Jul 30, 2009
- Messages
- 5,839
- Location
- USA
- Vessel Name
- Skinny Dippin'
- Vessel Make
- Navigator 4200 Classic
I think it's time to replace our aging shore power cords and Y-adaptor. The events in McCotter's Marina in Washington,NC kind of moved it up the priority list.
Skinny Dippin' normally uses 50A via two 30A plugs in her transom and a Y-adaptor at the dock post end. There are a few manufacturers of cords - Charles, Marinco, Furrion, and of course... Smart Plug (TWICE the price of conventional).
One other thing is that I sure would like to have 60' of cable. At 35', normal 50' runs are sometimes just not quite enough when we "bow-in", but 75'-100' is just TOO MUCH extra cable to deal with. Can I order custom lengths?
Any preferences among y'all?
Tom-
Skinny Dippin' normally uses 50A via two 30A plugs in her transom and a Y-adaptor at the dock post end. There are a few manufacturers of cords - Charles, Marinco, Furrion, and of course... Smart Plug (TWICE the price of conventional).
One other thing is that I sure would like to have 60' of cable. At 35', normal 50' runs are sometimes just not quite enough when we "bow-in", but 75'-100' is just TOO MUCH extra cable to deal with. Can I order custom lengths?
Any preferences among y'all?
Tom-