View Single Post
Old 12-20-2016, 08:58 AM   #20
ddalme
Senior Member
 
ddalme's Avatar
 
City: LAFAYETTE,LA
Country: USA
Vessel Name: Relenti
Vessel Model: Atlantic 30, 1983
Join Date: Mar 2015
Posts: 448
Use green locktite on shaft and pulley-let it cure(6 hours) then blue locktite on "New" set screws. If you have to remove pulley again you will have to use a puller and torch. Start the engine before putting on the belts and check that pulley is running true.
ddalme is offline   Reply With Quote