heat exchanger (good source)

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

tomtomterrific

Veteran Member
Joined
Jun 6, 2010
Messages
33
Could anyone recommend a good source for a heat exchanger and transmission oil cooler for a 120 lehman?* Im in LI NY.

*

Thanks,

*

Tom
 
Thanks!* I'm contacting them and American diesel.* Have you dealt with Lenco before?* Are you on LI?

*

Tom
 
Sendure, very high quality , in business "forever".
 
Thanks FF,

Sendure, that's great, the markings on the unit looked like Semdure.* I'll look for them too.
I have a 1981, 35 CHB Trawler with a 120 Ford-Lehman diesel:
*
·******** Model ***************** #2715E
·******** Serial ******************* #D0257/446
·******** Build***** *************** #11B5FS 400 100
·******** 6.22C
·******** Block A
**
The heat exchanger had markings:
*
·******** Semdure (I think)
·******** 2C211
·******** 119523
·******** Its ~20-1/2 end to end
·******** Babylon NY
*
The transmission oil cooler did not have markings but is was
*
·******** ~10 end to end
*
*
Thanks,
*
Tom
Telephone: 501.551.1415
*

*
 
American diesel for the oil coolers. Just changer mine. About $100 each.
 
Old Fart,

I replied last night but I don't see my reply posted.* Fiddlers green is in Lloyd Harbor NY www.fgali.org

"Where credit is good, where there's many a lass, and many a glass, and ne'eerr a stormy sea..."

*
 
Thanks to all who responded.

I am going with the Lenco units. They are local for me (LI NY) so I can avoid shipping. The were also considrably less on price.

For the cupro nickel main exchanger Lenco is $650
American Diesel was $795 (Bob Smith was quick/thorough in his reponse though)
Semndure was over $1000!

Thanks again,

Tom
 

Latest posts

Back
Top Bottom