View Single Post
Old 12-06-2016, 11:33 PM   #13
SoWhat
Guru
 
City: Boston
Country: US
Vessel Name: Adelante
Vessel Model: IG 30
Join Date: Nov 2016
Posts: 707
There may be a couple of problems that need addressing.

1) The trans oil cooler clearly needs replacement. Pull the zinc in the heat exchanger. If it's gone, then assume the engine oil cooler is close to failure. Flush the heat exchanger, replace both oil coolers. Make sure all coolers have a good metal to metal bond.

2) If you are adding oil, find out where the oil is going. Probably through the front seal into the bottom of the bell housing. Loosen up the bolts in the bell hsg and see if anything drips out. If so the tranny needs to be pulled and the front seal replaced.

-Gary
SoWhat is online now   Reply With Quote