View Single Post
Old 12-06-2016, 12:48 AM   #7
Veteran Member
City: Maryland
Country: USA
Join Date: Jul 2016
Posts: 35

Thanks for taking the time to reply. Consensus seems to be to choose lowest point(oil cooler hose) as best place to suck/drain oil with my little 12v oil change pump and flush through a gallon or so of oil after first flush until oil is clear. Boat is winterized in water so cannot run until spring. The mechanic I spoke with said he would normally repair/replace oil cooler and flush and that's all. Should be ok in the spring. I believe I spotted a new oil cooler in a spares bin in lazarette.
Eddieandgail is offline   Reply With Quote