Quote:
Originally Posted by Capt.Bill11
I don't ever recall seeing them do fast idle in reverse.
"To achieve Neutral Warm-up Mode, position the Control Head lever(s) in the Neutral detent. Depress and hold the station transfer button while moving the Control Head lever(s) to the Ahead detent. (Refer to Figure 12 "
The button you push should be on the side of the control facing you.
If it only goes into neutral idle in reverse you've got the wiring wrong.
|
Well, I did exactly what the manual says... but it only works in "reverse"
Checked all the wiring and color codes are as supposed to be
I have the feeling some of the jumper settings inside the control box may be wrong. Was looking for some "Ctrl - ALt Del" function to reset the box and start all over again!