View Single Post
Old 09-02-2016, 10:43 AM   #2
FOG
Guru
 
FOG's Avatar
 
City: Wilmington, NC
Vessel Name: DreamQuest
Vessel Model: Prairie 36
Join Date: Jan 2016
Posts: 550
You can buy inspection plates plastic or metal and install them.

But if you want to make one yourself here are the basics on how I did it:

Cut a hole where you want the inspection port.
Glass a flange to the piece that was cut from the hole.
Once cured put the hole piece with the new flange back in the hole and drill holes for bolts around the flange.
Remove the hole piece and Epoxy stainless steel bolts from inside the tank with threads on the outside.
You now have a cover that you can remove and replace.
FOG is offline   Reply With Quote