Thread: New head!
View Single Post
Old 08-12-2016, 12:50 AM   #8
78puget-trawler
Guru
 
78puget-trawler's Avatar
 
City: LaConner
Vessel Model: 34' CHB
Join Date: Apr 2016
Posts: 1,257
Hi Peggie, That is pretty much what I have read as well as to service life etc. However when I said bolts that is what is there, bolts. Not lags. There were nuts on the top and the heads were glassed onto the bottom of the board so what was sticking up was just the studs. So just grabbed hold of them with a Crescent wrench and broke them off. Usually in order to use lag bolts there must be something substantial to fasten to, other than a barely 3/4 thick board. Bolts would be appropriate here. Thanks!
78puget-trawler is offline   Reply With Quote