View Single Post
Old 08-10-2016, 06:14 PM   #9
Steve
Guru
 
Steve's Avatar
 
City: Thibodaux, Louisiana
Country: USA
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,782
Try one of these fittings it should fit the pipe if not cut the tip off or grind it down, WMT or a hardware store should have one. They are made in plastic too, plastic may be easier to jam in to the pipe for a tight seal. The same store will probably have a plastic, or metal on/off valve to screw on to the nozzle that would make things easier.
Brass Sweeper Nozzles - Manufacturer, Supplier
Good luck
__________________
Steve W.
http://mvgumbo.blogspot.com/
Steve is offline   Reply With Quote