Hi All. Was wondering if someone can give me some advice on how to access the engine room blowers on a 1980 44 foot MY. I thought I could just take the vent cover off the outside of the boat but the screws must have nuts on the other end as they do not come out when you turn them. From the inside the area is surrounded with plywood and from the engine compartment there is no way to reach up high enough. Seems like I need to cut a hole in the plywood panel or see if I can remove it. Seems crazy to have to remove that panel or cut it so wanted to check here in case I am missing something. Any help is appreciated
Thanks.
Thanks.