View Single Post
Old 03-14-2011, 03:48 AM   #16
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
RE: Advantages of a 24 volt system

"You can always use (2) 12VDC batteries in series or any combination that gives 24VDC with the abilty to take a feed at the 12 volt mid point. Then run one feed to the 24VDC panel and the other feed to a 12VDC panel. You could have the best of both worlds if needed based on the battery AH rating."


This guarentees the rapid death of both batts in the hookup.

One from discharging the other from over charging.

The Vannier actually does this by switching from one batt to the other , a couple of times a min, so both go up and down TOGETHER!
FF is offline   Reply With Quote