View Single Post
Old 07-11-2016, 09:13 AM   #4
Capt.Bill11
Guru
 
Capt.Bill11's Avatar
 
City: Sarasota/Ft. Lauderdale
Join Date: Apr 2014
Posts: 5,438
You put a very light coating of grease on the clutch gases. As well as the shaft.

You should also clean off the gases of the clutches and the faces on the wildcat before you grease them.

A fine wire wheel on a drill works well to clean the faces.

Post done pictures of the faces once you get it apart.
Capt.Bill11 is offline   Reply With Quote