fryedaze
Guru
- Joined
- Sep 4, 2011
- Messages
- 1,722
- Location
- USA
- Vessel Name
- Fryedaze
- Vessel Make
- MC 42 (Overseas Co) Monk 42
Anybody ever see this before? I was taking some measurements while planning to possibly change out engine mounts and discovered that the bolts on the rear mounts are bent. Someone told me that is what can happen on a hard grounding. The PO did ground hard enough to bend shafts twice. Maybe that's it. I don't appear to have alignment problems. The front mounts are not bent. They have been that way for at least six years and about 1200 hrs.
Dave
Dave